The MONOFLEX membranes are made up of distilled bitumen, selected for industrial use, with elastomeric and plastomeric polymers added to obtain a phase inversion compound whose continuous phase is formed by polymers
in which the bitumen is dispersed, where the characteristics are determined by the polymeric matrix and not by the bitumen even if this is the most consistent ingredient. The performance of the bitumen is therefore increased along with the durability and the resistance to high and low temperatures while the already optimum adhesive and waterproofing qualities of the bitumen remain unchanged.
MONOFLEX is produced in various weights and reinforced with fibreglass mat and in stabilized “non woven” polyester fabric.
MONOFLEX POLYESTER MINERAL is reinforced with a rot-proof “non woven” polyester fabric composite, stabilized with fibreglass mat which is very strong and elastic with optimal dimensional stability in hot conditions which reduces the problems of the straightness and the retraction of head lap joints as it is 2 to 3 times more stable than normal reinforcements in “non woven” polyester fabric.
Application Fields :
The long lasting strength, elasticity and stability at high and low temperatures make MINERAL MONOFLEX POLYESTER membrane ideal for use in non cold climates, as a single or multi-layer waterproofing system either for new building work or for refurbishment:
• On all sloping surfaces: on flat, vertical and curved surfaces.
• On different types of substrates: site-cast or prefabricated concrete substrates, on timber roofing, on the most common thermal insulation used in the building trade.
• For the various uses: terraces, flat and sloping roofs, dielectric coatings and walls in contact with the ground.