-
Epoxy Primer Washborne
Call for PriceMIXING/ THINNING/APPLYING 1- Mix the 2 components according to the following mixing ratio Epoxy Primer Clear 1 USG --> 1Kg Hardener 1 Pail -->… -
Happywall – Chalkboard Paint
Call for PricePRIMING/ THINNING/ APPLYING Prime the surface with Undercoat with a specific dilution up to 25% depending on the surface condition. Prime steel surfaces with metal… -
Happywall – Enamel Paint
Call for PriceOil paints are tough, hard wearing, easy to clean and formulated to withstand the extremes weather. -
Happywall – Epoxy Putty
Call for PriceSURFACE PREPARATION Surfaces must be solid, clean and dry, free from oil, grease, salt, dirt, and other contaminants. Old painted surfaces should be roughened properly… -
Happywall – Swimming Pool Paints
Call for PricePRIMING, THINNING, APPLYING Surfaces can be primed with EMP Exterior Masonry Paint Swimming Pool Paint is diluted up to 10% for the first coat and… -
Happywall – Traffic Paints
Call for PricePRIMING/ THINNING/APPLYING No primer is required, but highly absorbent concrete surfaces need impregnation with Sealer with a dilution of 50% Apply by brush, roller, airless… -
Happywall – Undercoat
Call for PriceTHINNING/ APPLYING Thin up to 50% with white spirit directly to unprimed surfaces, up to 75% for fair-faced concrete, and 20 - 25% for wood… -
Happywall – Varnish
Call for PriceFor interior and exterior use Thinning with white spirit Application: Brush, Roller, Spray -
Happywall Undercoat Water Based
Call for PriceApplication Method: Chalky, glossy, surfaces, previous coating, blistered paints should be cleaned by with sand paper. Fill any major holes. If needed, prime the surface… -
Maplexine scratched finish
Call for PricePRIMING / THINNING/ APPLYING Prime the surface with one coat of coarse texture waterproof with 20 % dilution depending on the surface condition. Apply one… -
METAL PRIMER Zinc Phosphate
Call for PriceAPPLYING Spray Use airless spray or conventional spray Brush Recommended for stripe coating and small areas, care must be taken to achieve the specified dry… -
Monocouche
Call for PricePRIMING / THINNING/ APPLYING Prime the surface with coarse textured waterproof with a 20 % dilution depending on the surface condition. Apply one coat of… -
Roller Texture
Call for PricePRIMING/THINNING/ APPLYING 1- Prime the surface with one coat of Roller Texture with a 20 % dilution 2- Apply a second coat with a dilution…
STE ATTAL
Shop
